特點: 樹脂浸透性適中，與樹脂有良好的相容性。 特別適用于噴射垂直面 貼膜性好，不回彈 易排氣泡 切割性好 Product features： Dealing with silane oftreating compound filament density steady and have excellent endurable of abrading .low fuzzeasy to chopping and good strands distribution.soluble with UP resin, panel transparent light well.endued good physical and chemical properties for final composite products 應用： 主要用于制造玻璃鋼船體，典型制品有座椅、水箱、汽車配件、衛生潔具、貯罐等玻璃鋼制品 Application Applying for transparent panel processApplying for reinforced UP resin.   包裝：合股無捻粗紗，每個紗團用聚乙烯塑料袋進行包裝，然后放入托盤或紙箱，每個托盤可碼放48個或64個紗團，每個紗團重量17-20kg。可根據用戶要求增加紗團重量。托盤堆高不大于2層，紙箱堆高不大于5層。 Packing    Each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers. 貯存：產品應堆放于干燥涼爽處，如若不用，請勿打開包裝物或扎緊包裝口，以免受潮。 StorageProduct shall be placed under dryness condition and shall no be open the covering membrane until applying.